Track down the battery-release latch and press down in it with one hand, and then pull the battery right out the case, setting the personal computer battery aside.
The convenience furnished by the portability of a laptop pc can
become a hindrance with the screen malfunctions? it isn't really easy to
connect a new monitor since you can easily with a desktop system. If the backlight
within the LCD screen has was unsuccessful, you can see virtually any image. To fix all the
problem, the entire inverter board as well as connected LCD cable will have
to be manually replaced. Here below are the instruction for use on your
reference.
1. Check inside manual of your laptop computer or search the infomation out of
the Internet to support the a component the manufacturer抯 websites. Basically
get that what product fo inverter board you will want for your computer, require
my Pavilion DV2000 Monitor as instance, I search for right one from an honest site, HooToo. com, after which you can i fix it without any help.
2. Turn off the laptop抯 operation system. Turned off the LCD screen
sport bike helmet. CTurn the whole laptop over hence the bottom end of the result is facing
up to you. Locate the battery-release latch and press down in it
with one hand, and then pull the battery right out the case, setting the personal computer battery aside.
3. Locate the rubber pieces for the edges and the top of LCD. Pop the
stopper pieces off the case by inserting a set object underneath
them after which you can pulling out toward an individual. Use a screwdriver to grab the
screws hidden beneath stoppers.
4. Put the pc back over and open up the LCD screen back.
Slide a flat and thin object, such in the form of screwdriver, directly
underneath the seam in the plastic bezel underneath the actual LCD screen.
Wiggle the screwdriver throughout gently until the bezel pops amazing
case. Lift the bezel up and be certain if there is some cable running to
any motherboard. Disconnect the cable if there's one.
5. Pull the fact on the screen closer, and then remove it all from
the laptop. Locate the inverter board in the bottoom of the screen and
find the cable running through the inverter board to your motherboard. Pull
off the strip of tape for the board and remove a screws holding it through
place if there are any on the particular model of pc. Disconnect
the cable within the motherboard.
6. Connect your motherboard cable for plastic bezel and place the actual bezel
back onto all the laptop case. Finally, just put the battery within the laptop
and power the software on, and then in the event the manufacturer抯 logo appear relating to the
screen, it mean you happen to be successfull to install the latest inverter
board and line rightly.
Article Tags:
Inverter Snowboard
